S-ASI ... B ...

Surge Protective Device for Data Transmission  



fulmine giallorosso grande 70

request support

S-ASI ... B ... is an SPD for installations in series with the telecommunication/signalling circuits to protect sensitive equipments with low resistability/immunity,
providing the following features and benefits:

  • Classification for the impulse test: categories C1, C2, C3, D1 (comply with IEC/EN 61643-21);
  • S-ASI ... SPDs are made in pluggable execution and they guarantee the continuity of signal circuit. They do not suspend it when the plug is pulled out;
  • The common and differential mode fine protection let at this device to well protect grounded circuits;
  • Providing protection against direct and indirect lightning effects;
  • The behaviour of the SPD is in Short Circuit failure mode when reaching the end of the life;
  • The connection is made by screw type terminals to guarantee the best connection reliability;
  • Ground connection is made via PE and G screw type terminals, as well as the top hat DIN rail.

Data sheet S-ASI ... B ...  

343 006 343 012 343 206 343 212....S ASI...B1..

343 006 343 012 343 206 343 212....S ASI...B2..

343 006 343 012 343 206 343 212....S ASI...BIMG..

FacebookTwitterGoogle BookmarksLinkedin