L 25/100 230 t ff 4

spd L 25-100 230 T FF 4
fulmine giallorosso grande 70request support

L 25/100 230 t ff 4 is a ready to install assembly of four voltage limiting SPDs providing four modes of protection, typically installed at the origin of the installation (e.g. in the Main Distribution Board (MDB)) for three-phase plus neutral 230/400 V TN-systems, with the following features and benefits:

Impulse test classification: Test class I and II / Type 1 and 2 (according to IEC/EN 61643-11);
• L 25/100 230 t ff 4 s a voltage limiting SPD for the protection of low voltage installations and equipment against direct and indirect
lightning effects;
Backup protection is not required with an upstream MCB ≤ 125 A or up to an Isccr ≤ 4 kA rms;
• The impulse current is divided into two independent branch circuits, each branch providing its own disconnector and Status Indicator;
Three colour Status Indicator with progressive indication of remaining performance.

Data sheet L 25/100 230 t ff 4

datasheet spd L 25-100 230 T FF 4

Related Articles

IA 25 230 4 IA 25 230 4
  IA 25 230 4 is a ready to install assembly of four voltage switching SPDs providing four modes of protection, typically ...
Protection Boxes Protection Boxes
These Protection Boxes with an IP65 enclosure provide a compact and preinstalled solution for applications in Power Centers, when...
L 13/40 230 ff 4 L 13/40 230 ff 4
L 13/40 230 ff 4 is a ready to install assembly of four voltage limiting SPDs providing four modes of protection, typically ...
L 7/30 230 ff 4 L 7/30 230 ff 4
L 7/30 230 ff 4 is a ready to install assembly of four voltage limiting SPDs providing four modes of protection, typically ...
L 3/30 230 ff 4 L 3/30 230 ff 4
L 3/30 230 ff 4 is a ready to install assembly of four voltage limiting SPDs providing four modes of protection, typically ...
L 2/10 230 ff 4 L 2/10 230 ff 4
L 2/10 230 ff 4 is a ready to install assembly of four voltage limiting SPDs providing four modes of protection, typically ...

FacebookTwitterGoogle BookmarksLinkedin