L 13/40 230 ff 2

spd L 13-40 230 FF 2
fulmine giallorosso grande 70request support

L 13/40 230 ff 2 is a ready to install assembly of two voltage limiting SPDs providing two modes of protection, typically installed at the origin of the installation (e.g. in the Main Distribution Board (MDB)) for single-phase 230 V TN-systems, with the following features and benefits:

Impulse test classification: Test class I and II / Type 1 and 2 (according to IEC/EN 61643-11);
• L 13/40 230 ff 2 is a voltage limiting SPD for the protection of low voltage installations and equipment against direct and indirect lightning effects;
Backup protection is not required with an upstream MCB ≤ 125 A or up to an Isccr ≤ 4 kA rms;
Three colour Status Indicator with progressive indication of remaining performance.

Data sheet L 13/40 230 ff 2

datasheet spd L 13-40 230 FF 2

 

Related Articles

IA 25 230 2 IA 25 230 2
IA 25 230 2 is a ready to install assembly of two voltage switching SPDs providing two modes of protection, typically installed at...
L 25/100 230 t ff 2 L 25/100 230 t ff 2
L 25/100 230 t ff 2 is a ready to install assembly of two voltage limiting SPDs providing two modes of protection, typically ...
L 7/30 230 ff 2 L 7/30 230 ff 2
L 7/30 230 ff 2 is a ready to install assembly of two voltage limiting SPDs providing two modes of protection, typically installed...
L 3/30 230 ff 2 L 3/30 230 ff 2
L 3/30 230 ff 2 is a ready to install assembly of two voltage limiting SPDs, providing two modes of protection, typically installed...
L 2/10 230 ff 2 L 2/10 230 ff 2
L 2/10 230 ff 2 is a ready to install assembly of two voltage limiting SPDs providing two modes of protection, typically installed...

FacebookTwitterGoogle BookmarksLinkedin