IA 25 230 4

Low Voltage Surge Protective Device

ZOTUPGAP

203 140 IA 25 230 4 SPD

 fulmine giallorosso granderequest support

IA 25 230 4 is a ready to install assembly of four voltage switching SPDs providing four modes of protection, typically installed at the origin of the installation, e.g. in the Main Distribution Board (MDB), for three-phase plus neutral 230/400 V TN-S systems with the following features and benefits:

  • Impulse test classification: Test class I and II according to IEC 61643-11 Ed. 1 (2011-03) and Type 1 and 2 according to
    EN 61643-11 (2012-10);
  • IA 25 230 4 is a self extinguishing spark gap based switching SPD, for the protection of low voltage installations against direct and indirect lightning effects;
  • Impulse discharge current of 25 kA 10/350 µs;
  • Nominal discharge current of 25 kA 8/20 µs;
  • High self extinguishing capability of 16 kA rms (follow current interrupt rating);
  • Green LED Status Indicator;
  • The special housing is designed for "Pollution Degree 3".

Data sheet IA 25 230 4 

203 140 IA 25 230 4

 

Related Articles

L 25/100 230 t ff 4 L 25/100 230 t ff 4
Low Voltage Surge Protective Device ZOTUPLIMITER L 25/100 230 t ff 4 is a ready to install assembly of four voltage limiting SPDs...
L 13/40 230 ff 4 L 13/40 230 ff 4
Low Voltage Surge Protective Device ZOTUPLIMITER L 13/40 230 ff 4 is a ready to install assembly of four voltage limiting SPDs...
L 7/30 230 ff 4 L 7/30 230 ff 4
Low Voltage Surge Protective Device ZOTUPLIMITER L 7/30 230 ff 4 is a ready to install assembly of four voltage limiting SPDs...

FacebookLinkedin