I 52 N-PE

Low Voltage Surge Protective Device

ZOTUPGAP

206 300 216 300 I 52 N PE prodotto
fulmine giallorosso grande 70request support

I 52 N-PE is a voltage switching SPD providing a single mode of protection, typically installed in TT-systems between neutral conductor N and protective earth PE, where connection type CT2 (1+1 or 3+1) is required according to HD 60364-5-534, with the following features and benefits:

  • Impulse test classification: Test class I and II according to IEC 61643-11 Ed. 1 (2011-03) and Type 1 and 2 according to EN 61643-11 (2012-10);
  • I 52 N-PE is a Gas Discharge Tube (GDT) based SPD, for the protection of low voltage installations and equipment against direct and indirect lightning effects;
  • Impulse discharge current of 52 kA 10/350 µs;
  • Nominal discharge current of 52 kA 8/20 µs;
  • The special housing is designed for "Pollution Degree 3";
  • To be combined with L 25/100 230 t ff, IA 25 230 when in single-phase and L 13/40 or L 7/30 when in single-phase and three-phase plus neutral 230/400 V TT-systems.

Data sheet I 52 N-PE

206 300 I 52 N PE

 

Related Articles

CP CP
Low Voltage Surge Protective Device ZOTUPACCESSORIES CP 1 is an insulated extension clamp with 3 wire terminations and enables a V-...
L 13/40 230 ff L 13/40 230 ff
Low Voltage Surge Protective Device ZOTUPLIMITER L 13/40 230 ff is a voltage limiting SPD providing a single mode of protection,...
L 7/30 ... ff L 7/30 ... ff
Low Voltage Surge Protective Device ZOTUPLIMITER L 7/30 ... ff is a voltage limiting SPD providing a single mode of protection,...

FacebookTwitterGoogle BookmarksLinkedin