CP

 spd accessories CP

 

 

 

CP 1 is an insulated extension clamp with 3 wire terminations and enables a V-connection even if the SPD is not equipped with double clamps.

CP 1 can be assembled on the SPD's PE terminal as well as on phase or neutral terminals.

Data sheet CP

data sheet spd accessories CP

 

spd accessories CP

CP2 to CP8 are fork-type busbars with 2 up to 8 connection points. Typical application: to provide a common PE connection for
several SPDs.
In TT system applications these busbars can also be used to provide a common neutral point connection to N-PE SPDs type I 12, I 52 and I 100.

data sheet spd accessories CP

Related Articles

I 52 N-PE I 52 N-PE
I 52 N-PE is a voltage switching SPD providing a single mode of protection, typically installed in TT-systems between neutral...
I 12 N-PE I 12 N-PE
I 12 N-PE is a voltage switching SPD providing a single mode of protection, typically installed in TT-systems between neutral...
L 2/10 230 ff L 2/10 230 ff
L 2/10 230 ff is a voltage limiting SPD providing a single mode of protection, typically installed in Sub Distribution Boards (SDB...

FacebookTwitterGoogle BookmarksLinkedin